• Molded-in resilient seat provides bubble-tight shutoff to 250 psi.
• Offered in two body styles: wafer and lug. The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
• Round, polished disc and hub edge provides 360 degree concentric seating, minimum flow restriction, lower torques and longer seat life.
• Upper and lower inboard bronze bearings ensure longer service life with low operating torques.
• Thru-stem design provides high strength and positive disc control with standardized end connection for operator interchangeability.
• Extended neck allows adequate clearance for flanges and insulation.
• Bi-directional, self-adjusting stem seal, located in the upper journal, is suitable for vacuum and pressure while also preventing external contamination of the stem area.
• Heavy-duty corrosion resistant top bushing, located in the upper journal, absorbs actuator side thrust.
• Cast-in top plate is an integral part of the body and is standardized to allow direct mounting of all Tyco actuators.
• Each valve is factory tested to 110 percent of specified pressure rating.

Size Range: 2" to 12" 
Pressure Rating: 250 psi 
Bi-directional Dead End Rating: 250 psi 
Temperature Rating: -40°F to +250°F 
Flange Accommodation: ASME 125/150